ALIENTECH PRO 5.8G Booster for DJI Drones

ALIENTECH PRO 5.8G Booster for DJI Drones

Looking for an antenna that will take your drone to new heights?

The ALIENTECH PRO 5.8G signal booster is a powerful, directional antenna with two amplifiers for extending the range of your signal. It is designed for use in the 5.725Ghz-5.800Ghz frequency band.

Buy with confidence from a USA seller! No need to deal with international sellers or warranties - all service is handled by a real team in Florida.

 The ALIENTECH PRO 5.8G signal booster provides comprehensive signal enhancement for your drone, with a transmission gain of 30-36dBi, a receiving gain of 25-30dB, and dual-polarization (vertical and horizontal). It can greatly improve the strength of your wireless signal, extend its range, and stabilize reception. Additionally, the booster is equipped with two high-capacity 18650@2900 mAh rechargeable lithium batteries that can provide over 300 minutes of continuous use.

Features:

Enhanced Drone Performance
The ALIENTECH PRO 5.8G signal booster is designed to improve the strength and range of your drone's radio waves, making flights safer and image transmission more reliable. It has a high gain and focuses signals in the front of the antenna for directional transmission. This booster can be quickly assembled and disassembled in under a minute, saving you time on pre-flight preparations.

ALIENTECH PRO5.8G Booster with a pair of built-in coaxial cables that can be used for Spark Mavic Mini(FCC mode) / Air / Pro 2 / Zoom /  Enterprise, Phantom 4 Pro / V2.0 / RTK, Inspire 1 2 Pro, Matrice 100 / 200 / 600 Pro, Smart remote controller, DJI drones 

Basic Parameters

• Frequency Range: 5150-5850MHz
• Gain: 5.8GHz 15dBi±0.5；
• VSWR：＜5
• Horizontal Beamwidth：8GHz 40°±5°
• F/B Ratio: 5.8GHz ≥22dB

Product Includes

In addition to the antenna, the following accessories are contained in the package:

• Pair of external link cables
• Pair of internal connection cables 

ATTENTION: Please pay attention before you place an order. You need to disassemble the original remote and remove the original antenna before you install the cable. In theory, although the installation process is non-destructive installation. However, you still have the risk of damaging the original remote control and losing the warranty for the remote control or drone. And users need to be careful that the outer insulation layer and shielding metal layer of the coaxial cable are intact.