PowerHub 200W Triple Battery Smart Charger for DJI Matrice 4 Series (M4T / M4E Compatible)

The PowerHub 200W Triple Battery Smart Charger by LKTOP is a third-party aftermarket charger built for the DJI Matrice 4 Series TB100 battery. Charges up to three TB100 batteries sequentially with three intelligent charging modes, real-time monitoring on a 1.5" IPS display, and a USB-C output for tablets, controllers, and accessories.

This is an LKTOP-manufactured product. It is not made by DJI, not sold under DJI's accessory program, and not covered by DJI's warranty. It is field-tested and used by operators who need higher-throughput charging than DJI's standard single-battery charger provides.

Real people answer the phone at (863) 224-6923. No hold queue, no offshore call center.

Ordering note on standalone accessory purchases: The PowerHub Charger is in limited stock. Currently reserved for customers who've purchased or are purchasing a Matrice 4 Series drone from us. Standalone orders without an active aircraft order have no firm estimated delivery date and may be cancelled. If you need this charger on a guaranteed timeline and don't have an active drone order with us, call us at (863) 224-6923 before ordering so we can confirm availability.

Quick Facts

• Manufacturer: LKTOP (third-party, not DJI)
• Compatible Batteries: DJI TB100 (Matrice 4T, 4TD, 4E) — verify M4TD compatibility before order
• Capacity: Charges 3 TB100 batteries sequentially
• Max Power: 200W
• USB-C Output: 36W max for tablets, RC Plus 2, and accessories
• Display: 1.5" IPS for real-time monitoring
• Charging Modes: 100% Full, Silent Mode, 60% Storage
• Plug Options: US or EU
• Delivery (with aircraft order): 5 to 7 business days

What This Charger Does

DJI's standard charger handles one TB100 battery at a time. For operators running 4 to 8 batteries in a working fleet, that's a significant bottleneck. The LKTOP PowerHub takes three batteries and charges them in sequence on a single unit — the first battery completes in ~56 minutes, then it moves to the second, then the third.

It's not simultaneous parallel charging (no current charger of this size can deliver that), but it lets one charger handle three batteries unattended overnight or between mission shifts, which is what most operators actually need.

Charging Mode Selection

• 100% Full Charging Mode for batteries that need to be flight-ready immediately. Charges each battery to 100% before moving to the next.
• Silent Mode for noise-sensitive environments. Slower fan operation, same charging logic.
• 60% Storage Mode for batteries going into long-term storage. Charges or discharges each battery to ~60%, the DJI-recommended storage voltage for TB100s sitting unused for weeks or longer.

Sequential Charge Times

Battery Position	Approximate Charge Time
Battery 1	~56 minutes
Battery 2	~95 minutes
Battery 3	~110 minutes

Charge times are approximate and vary with starting battery voltage, ambient temperature, and selected mode.

Compatibility Reference

Battery	Compatible
DJI TB100 (M4T, M4TD, M4E)	Yes (verify M4TD against current LKTOP documentation)
DJI TB30 (M30T)	No
DJI TB65 (M350 RTK)	No
DJI WB37 (RC Plus controller battery)	No (use built-in slots on the BS30 charging station)

If you're running an M30T, M350, or older platform, this charger is not compatible. Call us at (863) 224-6923 if you need help selecting the right charging solution.

Real-Time Monitoring

The 1.5" IPS display shows battery status, charging mode, voltage, current, and temperature for each battery slot in real time. Firmware updates are delivered over-the-air. This is useful for operators tracking battery health across a fleet — you can spot a cell that's underperforming before it fails on a mission.

Safety Protection

• Over-temperature protection
• Over-voltage protection
• Over-current protection
• Short-circuit protection
• Under-voltage protection
• Over-power protection

Specifications

Spec	Detail
Manufacturer	LKTOP (third-party, not DJI)
Weight	380g
Dimensions	138 x 64 x 52mm
Input	100V-240V, 50/60Hz
Max Output Power	200W
USB-C Output	5V/3A, 9V/3A, 15V/2.4A, 20V/1.8A (36W max)
Material	ABS + PC
Display	1.5" IPS screen
Battery Compatibility	DJI TB100 (Matrice 4 Series)
Plug Options	US or EU (select at checkout)

What's in the Box

• 1x PowerHub 200W Triple Battery Smart Charger
• US or EU power plug (select at checkout)

Who Buys This Charger

• Public safety teams running M4 fleet operations with multiple aircraft and battery rotations
• Utility and inspection crews running back-to-back missions across multiple days
• Wildlife recovery and SAR operators with 4+ batteries who need overnight charging cycles without manual swap
• Commercial drone pilots running daily revenue operations where charging throughput is the bottleneck

Protection and Coverage

This is a third-party LKTOP product. If the charger arrives defective, contact us within 72 hours of delivery and we'll coordinate a replacement under our DOA policy.

This charger is not covered by DJI Enterprise Care, DJI's manufacturer warranty, or CPS Drone Protection — those plans apply to DJI aircraft and integrated sensors. As a third-party charger, manufacturer warranty terms come from LKTOP. Damage caused to DJI batteries by use of this charger (charging faults, over-temperature events) would not be covered by DJI's battery warranty.

Why Covert Drones

Family-run shop out of Haines City, Florida. We've been equipping enterprise drone operators since 2017. Real people answer the phone at (863) 224-6923. If you're not sure whether this charger fits your fleet or whether you'd be better off with two of DJI's standard chargers, call us. We'll tell you straight.

Covert Drones LLC is an independent U.S. reseller. Not affiliated with or authorized by DJI. The PowerHub is manufactured by LKTOP, a third-party accessory maker. View our Return & Refund Policy before purchasing.

Frequently Asked Questions

Is this a DJI product?

No. The PowerHub 200W is manufactured by LKTOP, a third-party accessory maker. It is designed to charge DJI TB100 batteries but is not a DJI-branded or DJI-authorized accessory.

Will this void my DJI battery warranty?

DJI typically does not void battery warranties for the use of third-party chargers, but if a charger fault causes battery damage (e.g., over-temperature or over-voltage event), DJI may not cover the resulting battery replacement. Use any third-party charger at your own discretion. We've seen the LKTOP PowerHub work reliably in the field, but we cannot guarantee how DJI's warranty team handles any specific claim.

Does this charge three batteries at the same time?

No. The PowerHub charges three batteries sequentially, not in parallel. Battery 1 charges first (~56 minutes), then battery 2 (~95 minutes total elapsed), then battery 3 (~110 minutes total elapsed). The benefit is unattended operation — load three batteries in the morning, come back to three charged batteries.

Can this charge the M30T's TB30 batteries?

No. This charger is designed for the DJI TB100 battery only (Matrice 4T, 4TD, 4E). The M30T's TB30 batteries are physically and electrically different and require the DJI BS30 charging station.

What does "Storage Mode" do?

Storage Mode discharges or charges TB100 batteries to approximately 60% — the DJI-recommended storage voltage for batteries that will sit unused for more than a week or two. Storing lithium-polymer batteries at 100% accelerates capacity degradation, and storing them at 0% can damage cells. The 60% storage mode is the right setting for batteries going into a fleet rotation cycle where they won't fly for an extended period.

Does the USB-C port really output 36W?

Yes. The USB-C output supports up to 36W and can charge an RC Plus 2 controller, tablet, or other USB-C accessory while the main unit charges batteries. Useful for setting up gear in one spot and consolidating charging.